Anti Vibration Pad

Product Details:

We offer a variety of Anti- Vibration Systems to our clients. The systems are offered in different sizes and thickness in the industry and are highly admired by our clients for their less maintenance, easy operations and robust construction. Moreover, our clients can avail these products as per their needs and requirements.

Product Details:

Dynemech Mac Level, Series DML is suitable for high speed rotating machines having small or no axial forces.

Product Details:

Wedge Mounts Series DTSP with Spherical Positioner
Spherical Positioned are designed to transmit the load of the machine to the ground through wedge mounts at 90 degree despite the angle difference between machine base and foundation. The pressure on the insulation plates remain even. Thus, better alignment is possible. Variations are available for free standing and bolt on machine bases either with or without insulation damping. Dynemech is open to the idea of developing customer specific requirements.

Product Details:

Dynemech Insulation plates are made from the compound of Nltrlle Rubber, Cork, Synthetic Fibre which at varing compositions give different natural frequencies for providing vibration damping solution to almost every machine tool.

Product Details:

Dynemech is providing anti vibration solutions to the Indian Industry for the last 10 years. We are the only company to provide almost all types of vibration control solutions under one roof. Our product range consists of stud mounts for very small machines to wedge mounts for precision machine tools, along with air springs for very low natural frequency vibration damping to spring isolators for heavy presses, hammers, gen sets etc.

Aspiring isolator gives desired natural frequency to obtain phase difference in the frequencies for a rotating machine. Viscous Damping is an important feature of an isolation system. In most cases viscous damping is required to limit excessive movement which could occur as a machine operates at a speed near to, or coinciding with the resonant frequencies of the system. Generally this problem arises during slow run up and run down of rotating machines and during impact at each stroke in presses and hammers.

Advantages of Spring Isolators

• Very high vibration and shock isolation
• Better Structural Safety
• Improved Health Protection of workers - reduced machine operator fatigue and provide more congenial working environment
• Installation of sensitive equipments and heavy machinery possible in the same workshop
• Shop Floor Flexibility Maintains
• Extended tool and machinery life.
• No foundation is required for small and medium weight machines and reduced depth of foundation for very heavy machines
• Simple to install and reliable.

Applications

• Power Presses
• Forging Hammers
• Fans
• Blowers
• Generating Sets
• Centrifuges
• Test Beds
• Textile Machines
• Reducing Mills and Mixers
• Coal and Stone Crushers
• Refrigeration Units
• Pumps and Boilers etc.
• All types of heavy industrial machinery

Product Details:

We offer Anti Vibration Sheets made from high grade synthetic composite material.

Product Details:

..

Product Details:

There Sandwich mounts comprise one or more layers of elastomer bonded to flat steel plates. They are designed to with stand very high compressive loads. They are very slim large supporting surface area stackable mounts. The suspended equipment is free to move in all directions. High ratio of axial stiffness to radial stiffness. Very high axial loads.


To facilitate regular Autonomous Maintenance activities like cleaning, minor repairs and general inspection machines can be installed at the recommended height range of 100 - 150mm. (IMTMA Guidelines for Machines with TPM Features, 2004) Option for machines to be installed even on uneven floors without sacrificing stability.

Product Details:

Dynemech Flexi Foot Mounts, Series DGF is well suited for machines requiring vibration damping in both compression and shear. An anti skid plate is provided in the base of the mount to prevent machine walking. These mounts can also be anchored to the floor through the holes provided in the base for machines producing high unbalance forces.

Product Details:

We offer lightweight and sturdy adjustable leg pads made of reinforced polyamide. These dynamically balanced leg pads available in black color.

Product Details:

Wedge Mount -Series DB (Bolt on):
Dynemech Wedge Mount Series DB is designed for machines which requires precision leveling along with vibration reduction and are desired to be firmly mounted with the isolator or machines with high axial thrust and do not require any anchoring in the floor.

Series DBP have a height of 100mm / 150 mm (as per the requirement) at mean position to help proper cleaning and repairing under the machine (as per TPM guidelines for machine Installation by IMTMA). All other specifications are similar to Series DB, as given below.

Product Details:

Wedge Mounts - Series DF Dynemech wedge mounts are designed for industrial machine tools that require precision leveling. This three piece wedge mount has an adjustable bolt which moves the center wedge between top and bottom stationery wedges to provide lift, to the top wedge. Anti-Skid plate is provided on the top wedge therefore, machines are installed as free standing. Large supporting surface ensures solidity and rigidity. Vibration reduction is possible through assembling respective Dynemech insulation plates .

 

Wedge Mounts - Series DFP Series DFP have a height of 150/100mm at mean position as per IMTMA guidelines for TPM/TQM norms for machine installation.

Product Details:

Wedge Mount, Series DF:Dynemech Wedge Mounts are designed for industrial machine tools that require precision levelling. This three piece wedge mount has an adjustable bolt which moves the center wedge between top and bottom stationery wedges to provide lift to the top wedge. Anti-Skid plate is provided on the top wedge therefore, machines are installed as free standing. Large supporting surface ensures solidity and rigidity. Vibration reduction is possible through assembling respective Dynemech insulation plates.
Wedge Mounts, Series DFP have a height of 150 mm at mean position to help proper cleaning and repairing under the machine (as per IMTMA guidelines for TPM in Machine Installation). All other specifications are similar to Series DF, as given below.